HVAC Services
Routine Maintenance
Routine maintenance on your heating system is key to preventing equipment failure. By performing annual inspections and cleanings, you can prolong the life of your equipment and save yourself money in the long run. On an oil system, routine maintenance includes the tank inspection, which could spot small leaks or excessive corrosion, potentially indicating a future tank failure. If caught in time, annual maintenance can save you thousands of dollars! Additionally, annual A/C and heat pump cleanings can prevent excessive energy use, equipment damage, and the need for replacement. Waiting until the unit no longer cools to schedule maintenance can cause major damage to the equipment, so don’t wait until it’s too late! Routine HVAC maintenance is essential to keeping your home comfortable and your equipment running smoothly.
Air Conditioning Installation & Service
Most people don’t think about their air conditioning unit until it’s too late. They wait until the dog days of summer, when they’re already sweltering in their own homes, to call for help. But by then, it’s often too late. The air conditioning unit is overworked and strained, and it’s only a matter of time before it gives out entirely. That’s why it’s important to be proactive about air conditioning maintenance. Whether you’re in need of a new system, some routine maintenance, or your AC is simply not working properly, Pike’s HVAC has you covered. Our installation and replacement specialists will visit your home free of cost and offer a plan to help you decide what solution is best for your needs. So don’t wait until it’s too late – call Pike’s HVAC today.
Mini-split Heat Pumps
Mini-split heat pumps are a type of HVAC unit that is becoming increasingly popular due to their efficiency and small size. Mini-splits can be installed in 1-2 days and qualify for rebates up to $500 per ton and up to $2,000 per home. Mini-splits work by circulating refrigerant through a loop of coils, one indoors and one outdoors. The coils absorb heat from the surrounding air and transfer it to the refrigerant. The refrigerant then transfers the heat to the inside of your home for heating or to the outside for cooling. Mini-splits are very efficient because they only put out the energy needed to heat or cool your home. Traditional HVAC units circulate warm or cool air at max capacity throughout the entire home, even to unused rooms, which can result in wasted energy. Mini-splits are also very quiet because of the split design, where the compressor is located outside and away from the living space. If you’re looking for an efficient and compact HVAC unit, mini-splits are a great option.
Boilers
Boilers are one of the most common ways to heat homes in colder climates. While they are generally very effective, they can also be quite expensive. One way to reduce the cost of heating your home with a boiler is to upgrade to a more efficient model. Boilers come in various efficiency levels, and upgrading to a higher-efficiency boiler can save you up to 40% in fuel costs. Another way to reduce your energy bills is to install ECM hydronic pumps. These pumps are designed to be much more efficient than standard pumps and can save you up to 85% in electricity costs. The initial investment cost of an ECM hydronic pump may be higher than a standard pump, but the long-term savings can be significant.
Home Consideration
A heat load calculation is critical for properly sizing HVAC (heating, ventilation and air conditioning) equipment. It considers various factors, such as the insulation of the building, the number of windows, the type of construction and the climate. By understanding the heat load calculation, HVAC professionals can ensure that their equipment is sized properly and operated efficiently. In addition, a heat load calculation can help to extend the life of HVAC equipment by preventing it from being overworked. For these reasons, it is important to conduct a proper manual J heat load calculation before selecting and installing HVAC equipment.
Gas Equipment
Installing or servicing a gas line is a dangerous job that should only be conducted by a licensed professional. Gas leaks can cause fires and explosions, so the work must be done carefully and correctly. Many people are unaware of the potential hazards in gas lines, and as a result, they may attempt to do the work themselves. However, this is a risky proposition and one that could have disastrous consequences. If you need to have gas lines installed or serviced, hire a licensed professional with the experience and expertise to do the job safely.
Gas Boilers
A boiler’s efficiency is measured by how well it transfers heat from the combustion of fuel to the water in the system compared to the wasted heat vented to the outdoors with the combustion gasses. The higher the water temperature, the less efficient the boiler will be. When heating your home, you typically want lower water temperatures, especially when it’s not too cold outside. This is because it takes less energy to bring the water up to a lower temperature than it does to bring it up to a higher temperature. A boiler with a high-efficiency rating will be most efficient when used to heat your home with lower water temperatures. However, the efficiency rating of a gas boiler is tested at a lower water temperature. It will not apply if you use the boiler at a constantly high water temperature.
Ductwork
If you’ve ever been in a room that was too hot or too cold, you know how important proper airflow can be. The same is true for your HVAC system. Properly sized ductwork is essential for providing the correct air to each room in your home. If the ducts are too small, the lack of airflow won’t have a chance to heat or cool the room properly. This can lead to premature equipment failure due to overheating or freeze-ups during cooling.
On the other hand, if the ducts are too large, the airflow won’t evenly distribute throughout the home, leaving you with hot or cold spots. Either way, ensuring your ductwork is the right size to keep your home comfortable and your HVAC system running properly is important. It can help save you money on your energy bills!
Outdoor Reset Control
Many people believe that the key to a comfortable home is a boiler that can put out heat at high temperatures at all times. The bigger, the better. However, this is not always the most efficient or comfortable way to heat your home. On warm days, your boiler doesn’t need to work as hard to maintain a comfortable temperature. This is where an outdoor reset control comes in. You can achieve the highest efficiencies possible by programming your boiler to use lower water temperatures on warmer days and maintain temperature swings. This will maximize fuel savings and comfort while reducing wear and tear on your boiler. Outdoor reset control is the best way to achieve maximum efficiency in heating your home.
Radiant Systems
Radiant in-floor heating systems are becoming increasingly popular due to taking advantage of a boiler’s highest efficiency ratings. These systems circulate hot water through a system of pipes under the floor. This provides a more evenly distributed and comfortable heat and is virtually silent and discreet. Radiant in-floor heating is also very efficient, as it doesn’t require any forced air or ductwork. This means that there is no heat loss through ducts, making it an excellent choice for both new construction and retrofitting existing homes.
